I've had four or five taxi tests and could not get the audio in the videos to work. This video shows how nicely the Bearhawk taxis and demonstrates the compass calibration for the Dynon Skyview HDX.
Welcome to a Builders Blog of my Bearhawk 4 Place.
Build date started: June 1, 2018.
❗️Scroll to the bottom to start at the beginning of the build❗️
Click HERE to return to the beginning of this Bearhawk Builder blog.
Tuesday, March 23, 2021
Tuesday, March 16, 2021
2nd Engine Run and Brake Seating
After starting and running the engine for the 2nd time, I was able to taxi and seat the brake pads to the rotors. I am not able to cycle the prop. Will need to pull the prop and check to see if I pulled the plug off the crank. I'm pretty sure I did!
First Engine Start
What a fun day! Engine started on the 2nd attempt after the battery was jumped off.
Thursday, March 11, 2021
Fuel Flow Test
Very happy with the fuel flow test result. I was able to achieve a gravity flow rate to the engine driven fuel pump of 32.8 GPH. Boost pump to the servo was 56.2.
Subscribe to:
Posts (Atom)